How To Reset Oil Light On 2017 Ford Escape. Thank you for using car how to and the oil reset pro app. Without starting the vehicle, put the key in the ignition and switch it on and off 3 times quickly, on the 3rd turn leave it in the on position.
Then, press both the gas and brake pedals to the floor until the system finishes the reset. 2017 ford escape oil light reset steps. Press and hold the brake pedal for 2 seconds, then release.
Use The Up And Down Arrow Buttons To Scroll To The Settings Menu And Press The Right Arrow To Enter The Submenu.
Press “ ok ” to select. Turn key to the on position hold the accelerator and brake pedal down at the same time until massage says oil reset complete. Step on the brake and the gas pedal and hold it to the floor and you’ll.
Ideally After Traveling Every 5000 Miles, You Need To Perform An Oil Change (Also Called Service) So The Light Comes On.
Depress and hold the gas and brake pedals simultaneously. Press and hold the “ ok ” button for about 3 seconds. Use the arrows to highlight “ oil life “.
15 People Found This Helpful.
You can probably find one for $20. Do not start the engine. Press the right arrow button to move through the message center choices.
All You Will Need To Complete This Process Is An Obd Ii Scanner Tool.
Scroll to ‘oil life’ and press the right arrow button. You can find this tool at almost all auto parts stores and they range in prices. To reset the check engine light, go ahead and open up your car door.
To Reset The Oil Life Monitoring System Do The Following:
The line of engines in the 2014 escape range from the tame, 168. The oil reset is a clock of 12months and or 10k miles.it will come on before if you raced the engine at high rpms, coolant temps overheated, and or had low oil levels.on my 17 the reset is done on the left side of the steering wheel, very easy.like said before, you might of forgot to reset it. Using the information display controls on the steering wheel, scroll to ‘settings’ and press the right arrow button.